Blog Archives

Rowan Secures Contract for “Rowan Resolute” Drillship. Sells “Rowan Paris” Rig

The U.S. based drilling contractor Rowan Companies has entered into a three-year contract with Anadarko Petroleum Corporation.

The drillship is expected to be delivered at the end of the second quarter 2014 and operate in the U.S. Gulf of Mexico starting in the late third quarter 2014.  The Rowan Resolute is one of four ultra-deepwater drillships being constructed for Rowan by Hyundai Heavy Industries Co. Ltd. (“HHI”) shipyard in Ulsan, South Korea.

With the award of this contract for the Rowan Resolute, two of the Company’s four ultra-deepwater drillships under construction at HHI are now under contract.  The remaining two uncontracted drillships are scheduled to be delivered from the shipyard at the end of October 2014 and March 2015.

Rowan, in its fleet status report, said that the day rate for the contract is in the high $600.000s.

Rig contract in Indonesia

Also, the company has informed it has secured a 170 day contract with Pertamina Hulu Energi for Gorilla II rig in Indonesia at a day rate in the high $160s (above previous day rate in the mid $130s) expected to commence operation in September 2013.

Further in the report for June 2013, Rowan said it has sold the Rowan Paris rig for $40 million in June 2013.

Offshore Energy Today Staff, June 20, 2013

South Korea: Rowan Orders Ultra-Deepwater Drillship from HHI

Rowan Companies plc (“Rowan” or the “Company”) announced that it has exercised its option to build a fourth GustoMSC P10,000 design ultra-deepwater drillship with Hyundai Heavy Industries Co., Ltd. (“HHI”) with delivery scheduled in March 2015.

The cost for this rig, including commissioning, project management and spares, but excluding capitalized interest, is estimated to be approximately $620 million. This cost compares to peer companies’ previously announced 12,000 foot capable rigs equipped with 10,000 feet of riser. Rowan plans to equip its drillships with 2,000 feet of additional riser to enable operations in water depths up to 12,000 feet upon delivery. Each drillship will also be equipped with a second BOP for minimizing non-productive time. The Company will also incur operational training and personnel ramp-up costs in readying the drillships to commence well operations. Expected costs for the additional riser, BOP and training and ramp-up costs will be approximately $75 million. Total cost for the Company’s fourth drillship will be approximately six percent higher than the Company’s first three drillships primarily due to equipment price increases and projected labor cost increases. The agreement with HHI also includes an option for a similar fifth drillship exercisable in the fourth quarter of 2012, for delivery in the third quarter of 2015.

Matt Ralls, President and Chief Executive Officer, commented, “We are very pleased to add a fourth ultra-deepwater drillship to our fleet. The recent three-year contract obtained for our first drillship, the Rowan Renaissance, and strong customer enthusiasm for Rowan’s history of operational excellence, high-specification drillship design and experienced deepwater team, reaffirms our confidence in our expansion into the ultra-deepwater market.”

The Rowan Renaissance struck steel in July 2012 and is expected to be delivered in late 2013. The second and third drillships are expected to be delivered in the second and fourth quarters of 2014, respectively.

Subsea World News – South Korea: Rowan Orders Ultra-Deepwater Drillship from HHI.

USA: Nautronix Supplies NASeBOP for Rowan’s Two Ultra-Deepwater Drillships

Nautronix have secured an order from a major BOP supplier to supply their NASeBOP (Emergency BOP Acoustic Control System) to be installed on Rowan’s two new ultra-deepwater drillships.

Nautronix’ NASeBOP Control System provides a method of backup control of critical BOP functions in the event of failure of primary communication and control. At the heart of the system is Nautronix’ ADS² (Acoustic Digital Spread Spectrum) signalling technology. The system achieves a highly reliable communications link from a surface vessel to a subsea isolation device, such as a full BOP, or a simple isolation device such as which would be used during surface BOP drilling.

The NASeBOP subsea system consists of two Subsea Control Units (SCU) connected to remote transducers. Each SCU is capable of controlling and monitoring up to eight functions. This includes control of an Emergency Disconnect Sequence (EDS). A 10 meter cable allows remote transducers to be positioned away from the SCUs, thus reducing the risk of shading or multi path effects caused by adjacent structures or subsea objects. Two SCUs provide system redundancy as each can be used independently for control and monitoring.

Mark Patterson, CEO of Nautronix comments: “We have invested more than £1M in Research and Development over the past year with a significant amount in the area of our NASCOM product family supporting acoustic switches for BOPs. We are very pleased to have been awarded these contracts only a few weeks after the NASDrill RS925 orders for these drillships. It is a great testament to the technology, products and the investment Nautronix has made and I am delighted that such a well known and respected company such as Rowan Companies, Inc. have chosen Nautronix ADS² acoustics for their new deepwater drilling rigs. Nautronix continues to build upon our strong track record in the Acoustic BOP control system market.”

The Nautronix system offered is the only system in the world that is fully compliant with API 16D and 17E standards and all test ports are testable to full operating depth (4000msw/5800psi)

The two NASeBOP systems will be delivered in 2013.

Source

%d bloggers like this: