Blog Archives

USA: Aker Solutions to Supply Umbilicals for Murphy’s Dalmatian Field

Aker Solutions has been selected to supply two production control umbilicals and three umbilical termination assemblies (UTAs) to Murphy Exploration & Production Company – USA. The products will be delivered to the Murphy operated Dalmatian field in the De Soto Canyon located in the Gulf of Mexico which is jointly owned by Murphy and Ecopetrol America Inc. Contract value is undisclosed.

Aker Solutions has been selected to supply two production control umbilicals and three umbilical termination assemblies (UTAs) to Murphy Exploration & Production Company – USA. The main control and injection umbilical will tie the host facility to Murphy’s De Soto Canyon Block 4 well for a distance of 21 miles (34 km). The second umbilical is an infield umbilical that will connect two blocks 5 miles (8 km) apart. The umbilicals will be used in water depths of approximately 6 000 feet (1 800 metres). Installation is planned for the fourth quarter of 2013.

“Aker Solutions is excited to work with Murphy on this project. We have a strong track-record in the Gulf of Mexico and look forward to executing this contract,” says Marc Quenneville, head of Aker Solutions’ umbilicals business in North America.

Engineering, project management, and manufacturing of the umbilicals will take place at Aker Solutions’ state-of-the-art umbilicals facility in Mobile, Alabama. Engineering for the subsea UTAs will take place at Aker Solutions’ Houston office while manufacturing will take place in Mobile.

Opened in 2003, Aker Solutions’ umbilical manufacturing facility in Mobile is strategically located to serve the Gulf of Mexico and global markets. The facility, with its high capacity horizontal cabler, is specially designed to meet the challenges of demanding deepwater applications.

Subsea umbilicals are deployed on the seabed to supply necessary controls and chemicals to subsea oil and gas wells, subsea manifolds and any subsea system requiring a remote control.

Over the past 15 years Aker Solutions has delivered more than 400 umbilicals to some of the world’s most challenging fields, from harsh environment to ultra-deep, high-pressure water conditions.

Subsea World News – USA: Aker Solutions to Supply Umbilicals for Murphy’s Dalmatian Field.

Murphy Oil Malaysia Completes Rigless Intervention Campaign Using Welltec Services

image

Murphy Oil Malaysia recently completed a highly successful, rigless intervention campaign using Welltec services. Not only did the operation allow immediate production from a “lost” well, but it also saved the time and cost of a rig based sidetrack. The end result is expected to add 20 MMscf/d into the production portfolio.

In the first well, the drift run hung up at 945 ft MD when trying to perforate the well. Based on previous experience, the cause was suspected to be part of a cement wiper plug. This was pushed down to a nipple profile at 4,314 ft MD, leaving it still 1,690 ft above the perforation depth. After only minutes of milling, the Well Miller made it through the plug, which allowed the Well Tractor® to push it down to 6,398 ft MD, approximately 380 ft below the target perforation interval. Thereafter the well was perforated and put on production.

In the second well, a poor cement job had made the primary target zone inaccessible and left an obstruction inside the tubing. With pressing rig commitments there was insufficient time to fix the problem, leaving the well temporarily abandoned and a candidate for future sidetracking. Based on the success of the first well, the Well Tractor and Well Miller were used to push the obstruction from 400 ft to 2,132 ft MD , meeting the objective to prepare the well for sidetracking.

However, it was decided to attempt to push the obstruction as far as possible. Using the Well Tractor and Well Miller the well was cleared well beyond the sidetrack target depth to an eventual Hold Up Depth of 8,743 ft MD. Getting this far down the production string allowed access to two of the three reservoirs in this well, which could now be completed for production rather than scheduled for a sidetrack workover.

Related articles

Source

%d bloggers like this: