ATP Oil & Gas Corporation yesterday announced an operations update:
Drilling operations at the fourth Telemark Hub well at Mississippi Canyon (MC) Block 942 #2 are complete. ATP encountered 167 feet of new net pay sands above pre-drill estimates. These sands are in addition to the 72 feet of logged net oil pay seen in the original target sand. With this additional pay sand, ATP is modifying completion plans for MC 942 #2 and now expects to complete both hydrocarbon sands and establish production in late January 2012. ATP believes that these new pay sands will have a positive effect on production by extending the production life and third-party reserve estimates associated with MC 942.
Operations continue at the second Clipper well at Green Canyon (GC) Block 300 #4, where ATP has encountered oil pay sands. The well encountered 56 feet of logged net oil pay confirming reserves already booked. Completion operations are underway. Production at Clipper is still scheduled to begin in the third quarter of 2012 upon the completion of a pipeline, which is already under contract.
Third quarter production was 24,200 barrels of oil equivalent (BOE) per day, representing an increase of 14.7% over the same period a year ago.
ATP Chairman and CEO T. Paul Bulmahn stated, “ATP is excited with the drilling results from both the fourth Telemark Hub well, where we have encountered additional net pay sands above our projections, and the second Clipper well, which has now reached its total depth with completion operations underway. This development success demonstrates ATP’s commitment to advancing the company’s production growth, cash flow and asset base. ATP expects to begin production from the fourth Telemark well in the beginning of 2012, followed by additional planned production at Clipper and Gomez projects later in 2012, Entrada in 2013/2014 and Cheviot in 2014. We also look forward to drilling our first deepwater well at Shimshon in offshore Israel in 2012.”
ATP encountered 167 feet of additional net pay sands above pre-drill estimates. These sands are in addition to the 72 feet of logged net oil pay seen in the original target sand at the Morgus well located at MC 942 #2
Because of the considerable additional hydrocarbon-bearing sands, ATP is adjusting its completion plan to include two new gravel packs which will extend the projected completion time to late January 2012, and ATP expects a positive effect on production by extending the production life and third-party reserve estimates associated with MC 942.
The MC Block 942 #2 well, located in approximately 4,000 feet of water, was completed at a measured depth of 21,400 feet in the Miocene S sand at ATP’s deepwater Telemark Hub in the Gulf of Mexico. It is the fourth well that will be tied back to the ATP Titan floating drilling and production platform located at MC Block 941. ATP operates the deepwater Telemark Hub with a 100% working interest and owns 100% of the subsidiary that owns the ATP Titan and associated pipelines and infrastructure.
ATP has encountered oil pay sands at the second Clipper well located at GC 300 in the deepwater Gulf of Mexico. The GC 300 #4 well, located in approximately 3,450 feet of water, encountered 56 feet of logged net oil pay confirming reserves previously booked. The 9-5/8 inch casing has been set at 15,778 feet measured depth through the pay intervals. The well will now be completed and tested. In July 2011, ATP successfully completed and flow tested the first Clipper well, GC 300 #2 ST #1, at a rate of 45.6 MMcf per day and 4,656 Bbls per day. The pipeline lay barge for the Clipper wells is contracted for third quarter 2012 and will tie in both the GC 300 #4 and #2 wells to the Murphy Oil operated Front Runner production facility. ATP operates Clipper and presently owns a 100% working interest.
- USA: Chevron Strikes Oil in Deepwater Gulf of Mexico (mb50.wordpress.com)
- USA: McMoRan Encounters Hydrocarbon Bearing at Lafitte Well (mb50.wordpress.com)